- Home
- About Us
- Products
- HOT
- Applications
- News & Media
- Contact Us
 |
| Quantity: | |
|---|---|
BD-002Y03SNF-Y
Bowang
| Led Qty | 2pcs SuperFlux Led |
| Voltage | DC10-30V |
| Power | 0.26W |
| Dimension | 65*27mm |
| Working temperature | -40~75°C |
Product details
*The front and rear shells are separate and sealed by special technology.
*2PCS super bright leds,dependable performance increases the visibility of your vehicle on the road.
*Brighter and Sturdy,shining brighter than normal LED.
*With IP67 waterproof design,it will prevent from any sand,water,dirt,snow and dust.
*Yellow color marker light,other colors are also available.
High quality and Brand New!
Amber Led Side Fender Marker Lights
Mini-Sealed LED Surface mount design in lens / diodes for clearance, side marker or identification lightHigh performance LED
Long lifespan
Superior illumination & stability
High luminous efficiency with high brightness light output-2 PCS High Quality LED Diodes Inside of the Lamp Offer Extreme Bright light.
-Each light make by Super Strong ABS Plastic Lenses which have been UV treated so they will not fade from prolonged exposure to sunlight and weather elements.
-Sealed & IP67 waterproof assemblies.
-Worked as Side Marker Lights, Clearance Lights, Indentification Lights, Trailer Lights, Brake Lights, Tail Lights etc.
-Universal fits for 12V vehicles like Pickups Truck Trailers SUV van Caravan Camper Motorhome Boat Lorry Bus etc.
RFQ:
Q:Have regular lights for these led lights,plug and play?
A: They will replace your current lights if they are the same suze.There do not come with any kind of “plug” connector.Only a red and black wire to be connected to positive and negative 12 V respectively.
Q:Is the light plug and play?
A:Yes,we have two style of the lights.One is plug and play,the other is wire to wire connect.
Q：Is it difficult to wire them to your lights?
A：It's easy to install.you just know the positive wire and ground wire,and then connect the right wire together.
Q:how to installation?
A:For Special car lights, you can use it in plug and play.
And the universal lights,you need to hole the car to ensure the screw position,and then wire to wire to connect.
Q:Do they have a rubber seal to keep the rain out?
A: Don’t worry,the light have waterproof,and there is no any issues with water getting in them.
Q:Is there a gasket included?
A：Some lights can be use without gasket.
Q：When i went from regular bulb to led the signal light won’t blink?
A:Pls check your wiring because i went from a regular bulb to led on both tail light and the gate light and all the lights work fine.
| Led Qty | 2pcs SuperFlux Led |
| Voltage | DC10-30V |
| Power | 0.26W |
| Dimension | 65*27mm |
| Working temperature | -40~75°C |
Product details
*The front and rear shells are separate and sealed by special technology.
*2PCS super bright leds,dependable performance increases the visibility of your vehicle on the road.
*Brighter and Sturdy,shining brighter than normal LED.
*With IP67 waterproof design,it will prevent from any sand,water,dirt,snow and dust.
*Yellow color marker light,other colors are also available.
High quality and Brand New!
Amber Led Side Fender Marker Lights
Mini-Sealed LED Surface mount design in lens / diodes for clearance, side marker or identification lightHigh performance LED
Long lifespan
Superior illumination & stability
High luminous efficiency with high brightness light output-2 PCS High Quality LED Diodes Inside of the Lamp Offer Extreme Bright light.
-Each light make by Super Strong ABS Plastic Lenses which have been UV treated so they will not fade from prolonged exposure to sunlight and weather elements.
-Sealed & IP67 waterproof assemblies.
-Worked as Side Marker Lights, Clearance Lights, Indentification Lights, Trailer Lights, Brake Lights, Tail Lights etc.
-Universal fits for 12V vehicles like Pickups Truck Trailers SUV van Caravan Camper Motorhome Boat Lorry Bus etc.
RFQ:
Q:Have regular lights for these led lights,plug and play?
A: They will replace your current lights if they are the same suze.There do not come with any kind of “plug” connector.Only a red and black wire to be connected to positive and negative 12 V respectively.
Q:Is the light plug and play?
A:Yes,we have two style of the lights.One is plug and play,the other is wire to wire connect.
Q：Is it difficult to wire them to your lights?
A：It's easy to install.you just know the positive wire and ground wire,and then connect the right wire together.
Q:how to installation?
A:For Special car lights, you can use it in plug and play.
And the universal lights,you need to hole the car to ensure the screw position,and then wire to wire to connect.
Q:Do they have a rubber seal to keep the rain out?
A: Don’t worry,the light have waterproof,and there is no any issues with water getting in them.
Q:Is there a gasket included?
A：Some lights can be use without gasket.
Q：When i went from regular bulb to led the signal light won’t blink?
A:Pls check your wiring because i went from a regular bulb to led on both tail light and the gate light and all the lights work fine.
