Availability: | |
---|---|
Quantity: | |
BD-004W03SNA-Z
Bowang
Light quantity | 4pcs |
Voltage | DC10-30V |
Power | 0.53 W |
Size | 60*29.2mm |
Light color | Red light |
Product size:60*22mm
Our light:
1)High transmittance is PMMA material,the bottom shell is ABS material.
the bottom shell is ABS material.
2)The front and rear shells are separate and sealed by special technology.
3)4 pcs super bright leds,dependable performance increase the visibility of your vehicle on the road.
4)Waterproof IP67.
Super bright 4 LEDs of super flux type
Red lens dual color LED marker light, lens appears crystal clear when light is off. Also available in single color like clear, Amber and Cool White
Plastic guard bracket, available in black and chrome plated finishes
Durable PC lens and housing ultrasonically welded in a single lamp unit to ensure a permanent and water proof seal;
Surface mount on 2” (51 mm) centers, two bare end lead wires
Rated for 12V, tested to 13.8V
Also available in multi-voltage 10-30V operating range or 24V version by special order.
1.2 inch red oval surface mount led marker side light.Each light with 4 pcs super leds.
4.Easy to install by 2 screws, install in minute! Please kindly note: This light with black & white wire, and wires come out from middle of bottom base, White is Negative while Black is Positive.
Light quantity | 4pcs |
Voltage | DC10-30V |
Power | 0.53 W |
Size | 60*29.2mm |
Light color | Red light |
Product size:60*22mm
Our light:
1)High transmittance is PMMA material,the bottom shell is ABS material.
the bottom shell is ABS material.
2)The front and rear shells are separate and sealed by special technology.
3)4 pcs super bright leds,dependable performance increase the visibility of your vehicle on the road.
4)Waterproof IP67.
Super bright 4 LEDs of super flux type
Red lens dual color LED marker light, lens appears crystal clear when light is off. Also available in single color like clear, Amber and Cool White
Plastic guard bracket, available in black and chrome plated finishes
Durable PC lens and housing ultrasonically welded in a single lamp unit to ensure a permanent and water proof seal;
Surface mount on 2” (51 mm) centers, two bare end lead wires
Rated for 12V, tested to 13.8V
Also available in multi-voltage 10-30V operating range or 24V version by special order.
1.2 inch red oval surface mount led marker side light.Each light with 4 pcs super leds.
4.Easy to install by 2 screws, install in minute! Please kindly note: This light with black & white wire, and wires come out from middle of bottom base, White is Negative while Black is Positive.